User Guide
4
Step 1
Set up your TV
Ready for the step-by-step? You’re only minutes away from TV bliss!
1
2
Secure the stands to the TV with four (4) screws.
Put the column of the stands into the TV, align the
stands with the screw holes located on the TV.
Remove your TV from the box
Be careful, it’s heavy!
To prevent damage to the screen, carefully
place your TV on a soft, cushioned surface.
A
B
C
To use the stand
T
Warning:
o mount
on a wall
Never place a television set in an unstable location. A television set may fall, causing serious
personal injury or death. Many injuries, particularly to children, can be avoided by taking simple
precautions such as:
- Using cabinets or stands recommended by the manufacturer of the television set.
- Only using furniture that can safely support the television set.
- Ensuring the television set is not overhanging the edge of the supporting furniture.
- Not placing the television set on tall furniture (for example, cupboards or bookcases)
without anchoring both the furniture and the television set to a suitable support.
- Not placing the television set on cloth or other materials that may be located between
the television set and supporting furniture.
- Educating children about the dangers of climbing on furniture to reach the television
set or its controls.
If your existing television set is being retained and relocated, the same considerations as
above should be applied.
The VESA number is the horizontal and vertical measurement of the mounting holes. For
example, 200X200 refers to the fact that the mounting measurements are 200mm horizontally
and 200mm vertically.
Follow the instructions that come with the wall mount.
Your wall mount must be able to bear a minimum of five times the TV’s net weight to avoid
causing damage.
Models of 28” or 32” or 40” or 43”
Purchase a VESA 100x100 mount (requires qty. 4 M4x12 screws)
If you are mounting your tv to the wall, don’t attach the stands.
To mount your TV to the wall, purchase a VESA wall mount
Models of 49”
Purchase a VESA 200x200 mount (requires qty. 4 M6x16 screws)
Screws
(ST4X20mm for 28”/32”)
(ST4X25mm for 40”/43”)
(M5X35mm for 49”)
Stand
A
B
C