Operation Manual

EN 9
English
Installing channels
(Note: Satellite option is available only in selected
models.)
4. Follow a), b) or c) below.
- a) If you have selected Cable.
• Press
/
to select Automatic search,
then press OK/
to enter.
• Press
/
to select Channel type.
- If you select Digital & Analogue, press OK
to enter. Press
/
to select your Scan
mode if available (Full or Advanced).
• If you select Full, press
/
to select
the Search button and press OK to start
the automatic search for all DVB-C digital
and/or analogue channels.
• If you select Advanced, use the numeric
buttons to adjust the values for Frequency,
Symbol rate, Network ID, and use
/
to
select the Modulation mode. Then press
/
to select the Search button and
press OK to start the automatic search for
all DVB-C digital and/or analogue channels.
- If you select Digital, follow the same process
as above to start your automatic search for all
DVB-C digital channels.
- If you select Analogue, press OK to start
your automatic search for all analogue
channels.
- b) If you have selected Antenna.
• Press
/
to select Automatic search,
then press OK/
to enter.
• Press
/
to select Channel type (Digital
& Analogue, Digital or Analogue), then press
OK to start the automatic search for all DVB-T
digital and/or analogue channels.
- c) If you have selected Satellite.
• Press
/
to select Automatic search,
then press OK/
to enter.
• Press
/
to select Select satellite and
press OK to enter the satellite list. Press
/
to select your desired satellite and press
OK to conrm or deselect it. You can also press
the red button to edit the parameters of the
selected satellite. Press the button to return.
Then with your desired options of Scan mode
and Channels, press
/
to select the
Search button and press OK to start scanning.
5. The channel search may take a few minutes.
During the process, you can press OK to stop the
search halfway.
6. After the automatic search, channels are arranged
in a preset order. If you wish to skip channels,
modify the preset order, rename or delete
channels, press MENU or OPTION on the remote
control, select Settings > Channel > Organiser
and press OK/
to enter.