Instructions

----- 2 -----
3. Description
The multi display with RGB backlight is able to display up to 4 parameters
simultaneously. Thresholds can be associated with individual warning backlight
colors. The unit can be switched between measurement modes via an external
switch. Minimum and maximum values for each parameter are recorded and can be
displayed optionally using an external switch. Measured values of one parameter are
recorded over a time span of three minutes up to 14 days. The time base as well as
the display of the measuring history can be activated by an external switch.
The following parameters can be adjusted using the USB-Software: Scale endpoint,
scale caption, display style (pointer, tachometer, bar graph, and more), splash
display, backlight color, thresholds for alarm output, threshold warning color (light,
blink), hysteresis, and more. Recorded measurement values can be read and a
continuous transmission up to four measuring values can be enabled. Using the
software, values can be viewed and exported as CSV file.
Front
1 Unit or free text
2 Threshold value
3 Upper scale caption
4 Graphical measurement display
5 Digital measurement value
6 Lower scale caption
Back
1 2 optocoupler switch outputs
2 DIP switch for setting measurement
mode and upper scale caption
3 Supply voltage input
4 Jjumpers for configuration or connection
external switch for activating/ switching
measurement mode, graphical historic
data display, min/max display, auto-
scaling
5 USB interface for alternative power
supply and software communication
interface
6 Measurement inputs