Instructions

----- 8 -----
7. Mounting
Carefully insert the instrument into the panel cutout. Insert the mounting bracket from
the back and push towards the panel until instrument sits tight. Make sure the
mounting bracket is snapped into the side of the housing. To ensure IP65 protection
(dust and water jet) when mounting in a front panel, use optional gasket.
8. Specifications
DPM72-MPN
Supply 10-24V AC/DC or via USB, galvanically isolated
Display
LCD graphic display
192x160 pixel
Measuring range voltage 50/60mV DC shunt
Accuracy voltage 1%
Measuring range ampere ± 500V AC/DC
Accuracy ampere 1%
Measuring range frequency 10-500Hz
Accuracy frequency 0,1Hz
Recording of measurement 3 min to 14 days
Alarm outputs 2 optocouple outputs max. 30V, 50mA
Operating temperature 0°C to +50°C
Storage temperature -20°C to +70°C
Front panel 72 mm x 72 mm
Panel cut out 68 mm x 68 mm
Protection front IP65 from the front
9. Cleaning
Observe the safety instructions before cleaning the instrument. Clean instrument with
a dry lint-free soft cloth. Do not use solvents.
10. Contact Information
TDE Instruments GmbH, Gewerbestraße 8, D-71144 Steinenbronn
phone: [phone]
E-Mail: [e-mail]
Internet: www.tde-instruments.de, www.digalox.com