Datasheet

The Genesys™ family of programmable power supplies sets a new standard for flexible, reliable,
AC/DC power systems in OEM, Industrial and Laboratory applications.
Features include:
• High Power Density 3.3kW in 2U
• Wide Range of popular worldwide AC inputs, 1ø (230VAC) & 3ø (208VAC, 400VAC)
• Active Power Factor Correction (Single-Phase & Three-Phase AC Input)
• Output Voltage up to 600V, Current up to 400A
• Built-in RS-232/RS-485 Interface Standard
• Global Commands for Serial RS-232/RS-485 Interface
• Auto-Re-Start / Safe-Start: user selectable
• Last-Setting Memory
• High Resolution 16 bit ADCs & DACs
• Low Ripple & Noise
• Front Panel Lock selectable from Front Panel or Software
• Reliable Encoders for Voltage and Current Adjustment
• Constant Voltage/Constant Current auto-crossover
• Parallel Operation with Active Current Sharing; up to four identical units.
• Advanced Parallel Master / Slave. Total Current is Programmed and Measured via the Master.
• Independent Remote ON/OFF and Remote Enable/Disable
• External Analog Programming and Monitoring (user selectable 0-5V & 0-10V)
• Reliable Modular and SMT Design
• 19" Rack Mount capability for ATE and OEM applications
• Optional Interfaces
Isolated Analog Programming and Monitoring Interface (0-5V/0-10V & 4-20mA)
IEEE 488.2 SCPI (GPIB) Multi-Drop
Compliant LAN
• LabView® and LabWindows® drivers
• Five Year Warranty
Worldwide Safety Agency Approvals; CE Mark for LVD and EMC Regulation
Applications
Genesys™ power supplies have been designed to meet the demands of a wide variety of applications.
Test & Measurement systems, Component Device Testing.
Semiconductor Processing & Burn-In, Aerospace & Satellite Testing, Medical Imaging, Green Technology.
System Designers will appreciate new, standard, remote programming features such as Global commands.
Also, new high-speed status monitoring is available for the RS-485 bus.
Test Systems using the IEEE-488 bus may achieve significant cost savings by incorporating the Optional IEEE
Multi-Drop Interface for a Master and up to 30 RS-485 Multi-Drop Slaves.
Higher power systems can be configured with up to four 3.3kW modules. Each module is 2U with zero space
between them (zero stack).
Flexible configuration is provided by the complete Genesys™ Family: 1U 750W Half-Rack, 1U 750W, 1500W and
2400W Full-Rack. All are identical in Front Panel, Rear Panel Analog, and all Digital Interface Commands.
OEM Designers have a wide variety of Inputs and Outputs from which to select depending on application and location.
2 | GENESYS™ | 3.3kW