User manual

SAFETY INSTRUCTIONS.

ENVIRONMENTAL CONDITIONS

The Genesys power supply series safety approval applies to the following operating conditions:

*Indoor use *Ambient temperature: 0Cto 50 C

*Maximum relative humidity: 90% (no condensation) *Altitude: up to 3000m

*Pollution degree 2

FCC COMPLIANCE NOTICE:

Note: This equipment has been tested and found to comply with the limits for aClass A

digital device, pursuant to part 15 of the FCCRules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated inacommercial environment. This equipment generates uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment inaresidential area is likely to cause harmful interference

in which case the user will be required to correct the interference at his own expense.

Instruction manual symbol. The

instrument will be marked with this

symbol when it is necessary for the

user to referto the instruction

manual.

CAUTIONRisk of Electrical Shock.

Indicates hazardous voltage.

Indicates ground terminal.

Protective Ground Conductor Terminal

Off (Supply)

On (Supply)

Direct Current (DC)

Alternative Current (AC)

Three-PhaseAlternating Current

Standby (Supply)

The WARNING sign denotes a hazard. An attention toaprocedure is called.

Not following procedure correctly could result in personal injury.

AWARNING sign should not be skipped and all indicated conditions must be

fully understood and met.

The CAUTION sign denotes a hazard. An attention toaprocedure is called. Not

following procedure correctly could result in damage to the equipment. Do not proceed

beyond aCAUTION sign until all indicated conditions are fully understood and met.

Do not use this product in environmentswith strong Electromagnetic field, corrosive

gas and conductive materials.

WARNING

CAUTION