User's Manual

ENGLISH

Recording

1. Select a source to be recorded by turning the INPUT

SELECTOR.

2. Start recording.

< The volume and tone control have no effect on the recording

signals.

< If a 3-head cassette tape deck is connected to TAPE 2 (PLAY and

REC) jacks, and if the tape monitor function is set to on during

recording, you can listen to not the source sound but the sound

being recorded. Press the TAPE MONITOR button to turn on or off

the tape monitor function.

Selecting the speakers

Press the SPEAKERS button (A or B) to turn the speakers on or off.

Select a source by turning the INPUT SELECTOR (or

pressing one of the input buttons of the remote control

unit).

Tape Monitor Function

If you want to select the source connected to TAPE 2 jacks, press

the TAPE 2 MONITOR button to turn the tape monitor function

on. The TAPE 2 MONITOR indicator lights.

Press the TAPE MONITOR button again to cancel the tape monitor

function.

< When the tape monitor function is on, sources other than TAPE 2

cannot be heard. Be sure to turn the function off while listening

to other sources.

Play the source, and gradually turn up the volume to the

required level by turning the VOLUME knob.