User's Manual

10
Connections (front panel)
Audio input (IN—LINE 2/OPT 2) connector
This connector combines analog (LINE 2) and optical (OPT 2) inputs.
o The unit will automatically switch to analog (LINE 2) or optical
(OPT 2) according to the type of plug connected.
To enable this input, turn the INPUT SELECTOR knob to select
LINE2/OPT 2.
Analog (LINE 2) connection
Use a cable with stereo 3.5mm mini plugs to connect the head-
phone (or audio output) connector of a portable audio player, for
example, to output its audio playback through this unit.
Use a commercially-available cable with a stereo mini plug
for connection.
o When connected to the player’s headphone connector, adjusting
the volume on the player might be necessary to hear its sound
from this unit.
o The sound could distort, however, if you raise the volume of the
portable music player too much. If this occurs, lower the volume
on the connected player until distortions stops and then adjust
the volume on this unit.
3.5mm stereo mini plug
Optical (OPT 2) connection
Connect the optical digital audio output connector of a digital
audio device here.
Use a commercially-available optical cable with a mini plug
for connection.
Optical mini plug