User's Manual

EN
9
A Digital input (DIGITAL IN) connectors
USB port
Use to input digital audio from a computer. Connect it to a
computer’s USB port.
Use a commercially-available USB2.0 cable (A-B type) for
this connection.
ATTENTION
Before connecting with a Windows computer, you must install
the dedicated driver on the computer (page 19).
Proper connection is not possible with a computer that does
not have this driver installed.
RCA COAXIAL digital audio input connector
Use this to input digital audio. Connect the coaxial digital audio
output connector of a digital audio device to it.
Use a commercially-available RCA coaxial digital cable
for connection.
Optical digital audio input (OPTICAL 1) connector
Use this to input digital audio. Connect the optical digital audio
output connector of a digital audio device to it.
Use a commercially-available optical digital cable with
square connectors (TOSLINK) for connection.
B Analog audio input (LINE 1) connectors
Use these to input analog audio. Connect the audio output
connectors of a cassette deck, CD player or other audio output
equipment to these.
Use commercially-available RCA audio cables for
connections.
Connect this unit’s R input connector to the R output connec-
tor of the audio output device, and this unit’s L input connector
to the L output connector of the other device.
White (L)
Red (R)
White (L)
Red (R)
This unit Audio output
device
C Preamp audio output (PRE OUT) connectors
These output analog audio after volume adjustment by this
unit.
Connect these RCA connectors to a power amplifier or speak-
ers with built-in amplifiers.
Use commercially-available RCA audio cables for
connections.
Connect this unit’s R connector to the R connector of the
amplifier and its L connector to the L connector of the amplifier.
D Power inlet (~IN)
Connect the supplied power cord here.
After all other connections are complete, connect the power
cord’s plug to a wall outlet.
V
Do not use any power cord other than the one included
with this unit. Use of other power cords could result in
fire or electric shock.
V
Unplug the cord from the outlet when not using the
unit for a long time.
V
Complete all other connections before turning the
unit on.
o Carefully read the manuals of the devices that you are
connecting and follow their instructions when making
connections.
o Do not bundle connecting cables with power cords. Doing
so could cause noise.
o Connect all plugs completely.