Owners Manual

8
Connections (rear panel)
LRLR
A B
H
C D
FE G
Device that outputs
clock signal
Digital audio output
device
Digital audio output
device
CLOCK SYNC OUTDigital output
(COAXIAL)
Digital output
(OPTICAL)
RCA coaxial digital cable
BNC coaxial cable
Optical digital cable
RCA audio cables
XLR cables
USB cable
Included power cord
Audio input
(LINE IN, etc.)
Stereo amplifier or
powered speakers
Computer
c
Wall outlet
Connect cables for the pair set
for line output (page23).
Sound will only be output
from the selected pair.
If headphones are connected,
sound will stop being output
from the rear panel connectors.
The polarity of the XLR connec-
tors can be set so that either 2
or 3 is HOT (page23).
If you want to be able to
control the volume from the
amplifier, set LINE OUT LEVEL
to “FIXED 0dB” or “FIXED +6dB”
(page23).
Connect a set
of cables of one
type or the other.
Install the dedicated driver
on the computer before
connecting this unit to it
(page25).