DISC LABEL PRINTER INSTRUCTION MANUAL P-55

SECTION 9 : Control Panel Features
19
 Indicating Operation State
BUSY: shows the printer is in operation.
While colors are being printed on the transfer ribbon, the following messages are displayed on the
LCD. (The LCD displays the messages as shown below with PHOTO ink installed. With COLOR
ink installed, the printer prints black, cyan, magenta, and then yellow.)
B U S Y Ο
P r i n t i n g B l a c k
B U S Y Ο
P r i n t i n g Y e l l o w
B U S Y Ο
P r i n t i n g M a g e n t a
B U S Y Ο
P r i n t i n g C y a n
B U S Y Ο
D i s c T r a n s f e r
The above message is displayed while the image printed on the transfer ribbon is being
transferred to a medium.
Busy is also displayed for operations other than printing
[Preprocessing image to be printed]
B U S Y Ο
I m a g e C a l c u l a t e
[Preheating heatroller]
B U S Y Ο
A d j u s t i n g T e m p
*The above message is displayed and no other operations are performed until the heatroller reaches
the specified temperature.
When the temperature gets high enough, the printer starts a transfer operation.
[Cooling thermal printhead]
B U S Y Ο
H e a d C o o l D o w n
*As the printhead exceeds a certain temperature, the P-55 stops print-related operations indicating the
above message. The P-55 is automatically return to operation as the printhead goes down to the right
temperature.
When a print medium is loaded, a circle ( ) is displayed in the upper right corner of the LCD
display.