DISC LABEL PRINTER INSTRUCTION MANUAL P-55

SECTION 14 : Getting Label Print Job Started

8) After the second pattern has been printed, take out

the medium

NOTE

- The upper and lower test patterns relative to the center hole are the same, and so are the left

and right test patterns.

- The upper and lower scales relate to vertical adjustment and the left and right scales relate to

horizontal adjustment.

9) Pairs of longer and shorter lines are printed along the

vertical and horizontal scales. Determine which pair

of longer and shorter lines is aligned (or which pair of

lines has the slightest displacement between), enter

the corresponding values in the Horizontal and

Vertical boxes on the Maintenance tab, and click OK.

(In our example, you need to enter 8 in the Vertical

box.)