Owner's Manual

ENGLISH
9
Specifications
Platter
Drive system ......................................... Belt drive
Motor ............................................... DC motor
Rotation speed............................. 331/3rpm, 45rpm
Wow and flutter.................................... 0.1% or less
SN ratio ............... 67dB or higher (A-weighted, 20kHz LPF)
Platter...................................... Aluminum die-cast
30cm (12") diameter
Tonearm
Tonearm type ...............Static-balanced S-shaped tonearm
Effective tonearm length .............................. 223mm
Tracking force variation range ............................ 0–5g
Acceptable cartridge weight .......................... 3.0–12g
14–23g
(with the included headshell)
Cartridge
Type ....................................VM (equivalent to MM)
Output voltage.......................... 4.0mV (1kHz, 5cm/s)
Tracking force .................. 1.8–2.2g (2.0g recommended)
Cartridge weight .......................................... 6.1g
Included headshell weight
11 g (including screws, nuts and wires)
o The need for stylus replacement depends on use conditions,
but we recommend replacement after about 300 hours of
use.
o An Audio-Technica AT-VM95E VM Type cartridge is installed
in this unit.
(The body of the replacement stylus for the installed car-
tridge is green.)
Note: VM type cartridges have the same characteristics as
MM type cartridges.
o Replacement stylus model: Audio-Technica AT-VMN95E
Output voltage
PHONO EQ THRU........................ 4.0mV (1kHz, 5cm/s)
PHONO EQ ON .............................. 224mV (−13dBV)
Output connectors........................................ RCA
General
AC adapter power
Input......................... AC 100V – AC 240V, 50/60Hz
Output..................................... DC 12V, 500mA
Power consumption
Standby........................................ 0.5W or less
On (33, 45) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0W or less
Weight........................................ 5.0kg (111/8 lb)
Operating temperature range ...................... 5°C to 35°C
Dimensions (W × H × D) (including protrusions)
When the dust cover is closed
420 × 117 × 356 mm (165/8" × 45/8" × 141/8")
When the dust cover is open
420 × 381 × 402 mm (165/8" × 15" × 157/8")
When the dust cover is removed
420 × 102 × 356 mm (165/8" × 41/8" × 141/8")
o Performance data is specified at 20°C.
Included items
Felt mat × 1
45 RPM adapter × 1
Counterweight × 1
Headshell × 1
Audio-Technica VM type (dual magnet) stereo cartridge
(AT-VM95E) preinstalled
Platter × 1
Flat belt × 1
Pulley cover × 1
RCA audio cable with grounding terminal × 1
AC adapter (GPE053A-V120050) × 1
Owner’s manual (this document) × 1
o See the back of this document for warranty information.
o Specifications and appearance are subject to change without
notice.
o Weight and dimensions are approximate.
o Illustrations in this owner’s manual might differ slightly from
production models.