Operation Manual

1. Wired Network (LAN) Wizard: If the SMR is connected to a LAN network

(DHCP), the BRC directly controls the SMR

by WLAN connection (ad-hoc mode).

Connect the Ethernet cable from Router to

the SMR and select the LAN wizard.

The network wizard now transmits the

settings to the selected SMR and the SMR

connects to the network. During this

procedure you can see the SMR screen

again.

After few seconds you can read a message

window “SMR connected!“.

Now, the BRC also connects itself to the

network. Once the BRC is connected to

network, the mainscreen of the selected SMR

appears.