Operation Manual

4. Manual settings for LAN or WLAN: this offers individual settings without
guidance by a “wizard”. For experienced users or if your network offers specific
requirements like manual Wlan security and IP settings etc.
Example: manual WLAN setting
● After above Network Type setting is finished, BRC and SMR are connected
and the main screen will be displayed. The LEDs on the SMR stop flashing.
Attention: if connection failed (SMR LED keeps flashing green/blue), you simply
press on the “BACK” arrow top left on the BRC screen, go to “Search SMR” and
repeat the above procedure.
After the SMR has connected, you can call the SMR's “Settings“ menu by pushing
on the tools symbol in mainscreen, to do further settings. Please refer the section
“SMR Settings“ in this manual.
16