Operation Manual

SMR Settings

Provide all SMR settings:

Date & Time

Touch the NTP checkbox to enable/disable the network time synchronization.

Check/uncheck for daylight saving time setting.

Scroll the Time Zones and touch to select your appropriate time zone.

In case you do not use the NTP function (NTP deactivated), you can set the system

time and date manually.

Additionally, under time you can select the format of 12 or 24 hours time display.

Language

here you can select your preferred display language. In the language select screen

touch on the preferred country flag representing the language. After you selected a

new language, the system will reboot to enable all text entries in that language.

Sleep

Set the system sleep countdown timer. Select between Off- and 30-60-90 minutes.

You can set Sleep function also in the calendar screen by the top right button.

Startup

here you can chose your default start function, where you always like to start

operation of your WAP after power-on. Chose from: Mainscreen – Previous

Playback – Audioserver – USB-Disk – Internet-Radio – Clock. If you switch on your

SMR from Standby it will start with the selected function.

Network

Here you will find informations about the current network settings of the SMR, such

as IP address, MAC number, SSID name, etc..