Operation Manual

Reset

With this entry, the SMR can be reset to the factory defaults and then it returns to

Config mode (green/blue flashing LED). You will be prompted to confirm to reset the

system, for security reasons.

Attention: all Settings and the favorites will be erased by the reset!

Tip: before reset, proceed a USB backup of your settings.

Note: After the reset, the startup wizard will be available to guide you through the

basic settings.

Config.

With this button the current network settings will be erased and BRC and SMR

return to config mode. You will be prompted by a confirmation window, before

activating this function. If you have confirmed by “Yes“, you can configurate the

network settings again. Please refer the informations under Initial System Setup!

Attention: all Settings and the favorites will be erased by new configuration!

Reboot

With this button, the SMR will reboot. All settings and favorite stations are fully kept

unchanged!

Backup

With this item, you can backup all settings of your SMR in a file onto your USB

storage device and load back into your system if required.

This is a comfort feature e.g. to copy identical settings to a number of SMR devices.

Note: for this function, a USB device with free memory, connected to SMR, is

required!

BRC Setup

touch the BRC power button for more than 2 seconds. Then, the BRC settings

menu will show up.

In this menu, you will find functions (from

left to right) for device informations,

touchscreen calibration, search for and pair

with SMR devices, set the LCD brightness

automatic/manually, select/erase in the

SMR device list and setup other BRC

functions.

Almost all informations shown in your

BRC's display are transmitted from SMR

device to BRC, just before displaying, are

contents that are controlled by the SMR.

Just the changing from one SMR device to

another cannot be controlled by a SMR, the

BRC shall manage this – internally - on her own.