Operation Manual

Information

here you will find informations concerning firmware and maintenance, license info,

network info and a RESET function for the BRC.

Search SMR

If the SMR LED shows green/blue flashing during config mode, you can search for

the SMR for new configuration. The SMR just appears in this screen when in

config mode! If the SMR is already configured for network or ad-hoc connection, yu

can find it in the „Select SMR“ screen.

Please refer the description under Initial System Setup

Select SMR

here you can - same as the multiroom SMR list you reach from main menu – select

the desired SMR device for control.

Advanced

Language

here you can select your preferred display language. In the language select screen

touch on the preferred country flag representing the language. After you selected a

new language, the system will reboot to enable all text entries in that language.

Network

AD-HOC and Infrastructure

Here you can set the BRC to Ad-Hoc (direkt) mode or Infrastructure (WLAN) Mode.

This function offers you the choice to control networked SMR devices and ad-hoc

controlled devices by the same BRC, if you have both of them installed.

AP Search

Manually changes of the BRC network settings. Please refer under Manual

Network Settings