Instruction manual

Installation

Following descriptions explain how to install the WAP-V6000 with basic setup.

Install your WAP-V6000 in this order:

1. Connect WAP-V6000

2. Set Up WAP-V6000

3. Install software on your computer from Installation CD

4. Configure your Twonkymedia Server to work with the WAP-V6000

Connections

Make sure you have the appropriate cables for connecting. Take care to watch the

colors of the plugs on the cable.

For Video, WAP-V6000 offers digital HDMI or analogue Composite connections.

For Audio, beside the audio that goes through the digital HDMI connection, there

are digital S/P-DIF coaxial and optical connections as well as analogue stereo line

outputs.

Note: If your audio system is connected by digital outputs, please go to

Setup System Setup Audio Setup  

for configuration.and set the audio output WAP-V6000 to Digital mode.

For Network, you may have an Ethernet cable (Lan) plugged into the unit or

connect by the wireless system (wlan). Neither will interfere with the other, but only

one network can be accessed at a time (wired or wireless).

Connection Diagram

Following is a connection example with network and UPnP devices.