Instruction manual

HDD Installation, Configuration and File Management

Hard Disk Drive Installation

WAP-V6000 supports 3.5” SATA HDD as internal storage. By installing the HDD

inside, you can copy and delete media files via computer to local HDD and record

streams to HDD.

Attention: We recommend you to have a new HDD to install. You can chose to let

WAP-V6000 automatically format the HDD to EXT3 and erase your existing files.

Follow the instructions below to set up HDD.

1. Make sure WAP-V6000 is turned off.

2. Lay the unit upside-down on the working surface.

Attention: to avoid scratches on the cover's top surface, lay the case cover

upside-down on a soft cloth!

3. Use a screw driver to unscrew the 4 screws at the bottom.

4. Remove the top cover from bottom tray.