Instruction manual

ATTENTION: WAP-V6000 will format your HDD as EXT3 format for best

performance. This file format can not be recognized by Windows system originally.

Note: By default, WAP-V6000 will check the format of the HDD if the HDD was

initialized by WAP-V6000 with EXT3 format. The data in the HDD, which is not with

EXT3 file system, may still be able to be played by WAP-V6000. This way, functions

like copy via USB and network will NOT be working.

There is a setting option to avoid HDD format checking after power-on. Please go to

Setup  System Setup  Hard Disk Share for configuration.

Copy files from USB Storage Device to WAP-V6000 (Local HDD)

Once the WAP-V6000 is installed with a local HDD, you can copy files from USB

storage device through USB hosts, or copy and delete files from computer through

LAN.

Follow below steps to copy files from USB storage device.

1. Go to “My Media” at Set Up Main Page

2. Select the name of your USB Storage device from the server list.