Instruction manual

BitTorrent Downloader

The model WAP-V6000 incorporates the BitTorrent download function. Make sure

the local 3.5” HDD is already installed before enabling this feature. (Please refer to

HDD Installation as mentioned in this operation manual).

Enabling the BitTorrent Function

After the HDD is installed, follow below steps to start the download.

1. Go to the “Setup Main Menu”, and highlight “BitTorrent Setup”

2. Select “Enable BitTorrent”.

3. The option, Max Upload Connection, is to prevent the traffic of your outgoing

network from being too heavy, and keep a high CPU efficiency of the device.

4. The option, Max Upload Rate and Max Download Rate, is for users to utilize

available bandwidth according to individual network management.

5. The option, Listen Port and DHT Port, is for users to configure the maximum

network efficiency, which are correspondent to the configuration of local NAT

and Routers.