Instruction manual

TV Mode Setup Table

Item Name Settings Action

Video Output P-SCAN YPbPr/ S-Video/ HDMI Select

TV System

NTSC/480p/720p60/1080i60/

1080p24/1080p60

Select

Aspect Ratio 4:3 PS/ 16:9/ 4:3 LB Select

Note: For some video film which is with 24 frames per second, you may see poor

quality on the display. Please select 1080p24 as the TV output mode, and make

sure your TV set support 1080p24 before the trial.

Audio Setup

Please make sure the Digital Audio Output mode (SPDIF-PCM / SPDIF-RAW) is

turned on, if you are connecting the Optical/Coaxial cable.

Audio Setup Table

Item Name Settings Action

Digital Audio Output ON / OFF Select

Analog Audio Output

STEREO / MONO R / MONO L

/ MIX MONO

Select

DTS SPDIF RAW (passthrough) -

AAC SPDIF PCM / SPDIF RAW Select

AC3 SPDIF PCM / SPDIF RAW Select

WMA PRO SPDIF PCM / SPDIF RAW Select

Note: For DTS (Digital Theater System) audio tracks, the device passes it through

digital audio output port (Optical or Coaxial cable) to an external decoder.