Instruction manual

Trouble Shooting
No Television display or Poor Display.
1. Make sure your TV is turned on and switched to the correct input.
2. Make sure WAP-V6000 is turned on and switched to the correct TV mode.
3. If the TV Mode that you are using is not the right one for your television, you
may not be able to see the display on television. To fix this problem, push
“Output” key on the remote control. You can cycle through each of the
possible TV modes to find and select the correct one.
4. Make sure you are using the correct video cables and that they are
connected firmly to WAP-V6000 and to your TV.
5. The Power cords for WAP-V6000 and your TV are securely connected to a
working power source.
Unstable Display with 1080p24 films
For some video film which is with 24 frames per second, you may see poor quality
on the display. Please select 1080p24 as the TV output mode, and make sure your
TV set support 1080p24 before the trial.
No Audio Output with films with DTS encoded audio track.
WAP-V6000 does not decode audio with DTS format, but pass through to S/PDIF for
external AV amplifier. For the films with DTS sound tracks, pls enable ‘Digital Audio
Output’ and use an external decoder.
WAP-V6000 does not find my network.
If you use wireless networks, make sure that the Wireless Network Name (SSID)
and the security settings of WAP-V6000 and media server match exactly. If you use
wired network, make sure the cable hooked correctly.
78