Operation Manual


Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
7 TEAM KA VT 10 - 090401
Assembly page 7/20
Fax [phone]
OPERATION
Speed control:
Plug in the appliance and select the desired speed setting by turning the rotary speed knob (1)
0 -Stop
1 - Low
2 - Medium
3 -High
ROTATION OF THE LOUVER
You can have the louver (4) rotate by pressing the louver rotation switch (2). This system will
allow spreading the airflow around the room in order to refresh as big a volume as possible.
PROGRAMMING
 This appliance is equipped with a timer (3) which allows you to programme the operation
duration.
 For a continuous operation, put the timer in ON position.
 To set the operation duration, turn the timer clockwise to the desired duration (e.g. 80
means that your appliance will function during 80 minutes).
 When the timer rotary switch reaches the OFF position, the appliance switches off
automatically.
SAFETY DEVICE
This appliance has a special safety device that will switch off the appliance if it tips over
accidentally or if it is not positioned correctly. If this happens, place the appliance in correct
position on a stable surface and it will continue operating normally.
CLEANING AND CARE
 Always make sure the air vents are not obstructed and always unplug the fan before
cleaning.
 Clean the air vents with a vacuum cleaner. Never try to enlarge the openings of the vents
as their size was designed to ensure a maximum safety.
 Wipe the exterior plastic parts with a soft damp cloth.
 Do not use any abrasive cleaning products or solvents that may scratch or damage the
surface.
 Do not allow water or other liquid to enter the motor housing and never immerse the
appliance in water or any other liquid.
PROTECTION OF THE ENVIRONMENT– DIRECTIVE 2002/96/EC
In order to preserve our environment and protect human health, the waste electrical and
electronic equipment should be disposed of in accordance with specific rules with the
implication of both suppliers and users. For this reason, as indicated by the symbol on the
rating label or on the packaging, your appliance should not be disposed of as unsorted
municipal waste. The user has the right to bring it to a municipal collection point performing
waste recovery by means of reuse, recycling or use for other applications in accordance with
the directive.