How to Guide
1. PRODUCT NAME
TEC
®
Skill Set™ Unsanded Caulk
2. MANUFACTURER
H.B. Fuller Construction Products Inc.
1105 South Frontenac Street
Aurora, IL 60504-6451 U.S.A.
800-832-9002 Customer Support
800-952-2368 Fax
tecskillset.com
3. DESCRIPTION
Smooth, unsanded and color-matched to some TEC® Skill
Set™ grouts. Forms a tough, flexible, water and weather-
resistant seal on most building materials, protecting your
installation from moisture, drafts and rot. Contains a special
silicone additive to promote greater adhesion and longer life.
Dries to a tack free finish in one hour. Paintable. All white and
colored formulations meet ASTM C834 standards for exterior
grade caulks. Suitable for interior and exterior use.
Key Benefits and Features
Mold and mildew resistant
Water-resistant
Tough, flexible seal
Interior/exterior use
Freeze/thaw stable
Packaging
10.5 fl. oz. cartridge
Colors
Available in 12 colors.
Coverage
Figures shown in the chart are presented only as guidelines.
Coverage will vary with application and bead size.
Approximate Coverage
Unit Size
Using a 1/4” Bead
10.5 fl. oz.
25 lineal feet
Storage
Store in a cool, dry location.
Shelf Life
Maximum of 24 months from date of manufacture in
unopened container.
VOC 14 g/L
Unsanded Caulk
Limitations
•
1
⁄2" wide gap maximum.
• Do not apply at temperatures below 40°F (4°C) or above 105°F
(41°C).
• Do not use for applications subject to constant water exposure,
standing water (including horizontal installations subject to
standing water), or areas with extreme high humidity.
Cautions
Read complete cautionary information printed on product container
prior to use. For medical emergency information, call 1-888-853-
1758.
This Product Data Sheet has been prepared in good faith on the
basis of information available at the time of publication. It is
intended to provide users with information about and guidelines for
the proper use and application of the covered TEC
®
Skill Set™
brand product(s) under normal environmental and working
conditions. Because each project is different, H.B. Fuller
Construction Products Inc. cannot be responsible for the
consequences of variations in such conditions.
4. TECHNICAL DATA
Applicable Standard
Tested in accordance with American Society for Testing and Materials –
ASTM C834
TEC® Skill Set™ Unsanded Caulk
Description
ANSI Requirement
Typical Results
Extrudability
> 2 grams/sec
Passes
Low Temperature
Flexibility
No cracking through
to substrate or
adhesion loss
Passes
Extension
> 75% recovery and
< 25% adhesion
loss, with no
cohesive cracking
Passes
Slump
< 0.15 inch (3.80
mm)
Passes
Staining
< Stain Index 3
Passes
Tack Free Time
No material
adhering to
plastic strip after
1 hour
Passes
Volume Shrinkage
< 30% maximum
shrinkage
Passes
Greater than: > Greater than or equal to: ≥ Less than: < Less than or equal to: ≤