Installation Guide

1.6
Installation Instructions for
DJ-Archie, DJ-Georgi, & DJ-Wally Lite
700DJARCHC, 700DJGRGC, 700DJWAL_C
1
920DJWALY
GENERAL PRODUCT INFORMATION:
This product is suitable for indoor dry locations only.
Wild Thing, Sun Louver, Flight Paper, MR16 Snout, Round
Glass Shield, Lil Egypt, Lil Wok, Barndoors, Snap Barndoors,
Backlight Shield, Louver Lend Holder, Snap Louver Holder,
Eggcrate Louver, and Glass Lens are the compatible
accessories and optical controls.
DISPLAY JACK
1E
Installing the Lamp
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
Use MAX 75 Watt, MR16 Front Cover Halogen
Lamp.
Push the MR16 lamp pins all the way into the socket
pins.
NOTE: Use only your fingers and a soft cloth to
replace the lamp.
SOCKET PIN
LAMP PIN
HOOK IT HERE
HOOK IT HERE
LAMP HOLDER
SPRING
SLOT IN THE MIDDLE
OF THE SOCKET
MR16 LAMP
Hook one end of the lamp holder spring (provided with
the package) onto front of the lamp. Wrap the spring
over the slot in the middle of the socket and hook the
other end onto front of the lamp.
1A
1
2
1B
1
2
2