User manual

ManualsBrandsTECHNAXX ManualsCar Mobile Phone AccessoriesMobile Phone Car Holder TE08

Technaxx

User Manual

Smartphone Multi Car Charger Kit TE08

The Declaration of Conformity is under the Internet link: www.technaxx.de/ (in bottom bar

“Konformitätserklärung”); Before using the device, read the user manual carefully.

Service phone No. for technical support: 01805 012643 (14 cent/minute from German

fixed-line and 42 cent/minute from mobile networks). Free Email: support@technaxx.de

Universal Smartphone Car Holder with 4-port USB charger for mobile devices

Features

 Universal car holder for Smartphones, Tablets and other mobile devices

 USB charger for the cigarette lighter socket with 4 ports

 ON and OFF power button

 Holder with suction cup for windows for 3.5"~5.7" Smartphones

 Holder to fix on the air vent for 3.5"~6.3" Smartphones

 Fast and high efficiency charging with 6.8A

 Over current and over voltage protection

 Short circuit protection

 Non-slip feet are keeping your mobile device in the cradle steadily

 Easy to install and remove in all vehicles

IMPORTANT: It is your responsibility to check traffic and safety regulations in your area, to

ensure the lawful use of this device.

Technical Specifications

4-port USB car charger

1x 2.4A for iPad, 1x 2.4A for Android

1x 1A for iPhone, 1x 1A for Android

Power supply (input power) DC 12V ~ 24V

Output current 5V / 6.8A

Weight / Dimensions Charger 46g / (L) 10.0 x (W) 5.4 x (H) 2.1cm

Weight / Dimensions Clamp

56g / (H) 12cm [max. H 16cm], (inner W) 7cm,

(outer W) 9.5cm, (Thickness) 5cm

Weight / Dimensions Air Vent

Holder (= Holder with Cradle)

58g / (L) 12.5 x (W) 7.5 x (H) 2.1cm

(inner W) 5.3cm / (max. inner W) 7cm

Weight / Dimensions Suction Cup 34g / (L) 7.0cm x Ø 5.5cm

Package Contents

4-port USB charger, Suction cup holder, Air vent

holder, 2x cap, User Manual

Summary of content (5 pages)

PAGE 1
Technaxx® User Manual Smartphone Multi Car Charger Kit TE08 The Declaration of Conformity is under the Internet link: www.technaxx.de/ (in bottom bar “Konformitätserklärung”); Before using the device, read the user manual carefully. Service phone No. for technical support: 01805 012643 (14 cent/minute from German fixed-line and 42 cent/minute from mobile networks). Free Email: support@technaxx.
PAGE 2
Product overview with its USB ports How to assemble the cradle (1) Place the screw cap (threads facing up) over the ball joint of the Air Vent Mount (2) Snap the cradle on to the ball joint of the Air Vent Mount. You will hear a “click” tone when it is properly connected. (3) Tighten the screw cap to the cradle by turning it clockwise. NOTE: You may have to loosen the screw cap to adjust the cradle to your desired angle later.
PAGE 3
How to attach the Air Vent Mount to the air vent of a vehicle (1) Gently pull back the spring release of the Air Vent Mount with your finger until you can no longer pull back. (2) While holding the spring release back, insert the Air Vent Mount in between the panels of your air vent. Lower the Air Vent Mount and release your finger to lock the Air Vent Mount in to place.
PAGE 4
Universal Windows Mount with suction cup  Using directly on the smooth surface like windshield  It has a “non-slip feet” to keep a cell phone in the cradle steadily.  Compatible with: iPhone, Blackberry, Samsung, Nokia, HTC and more smart phones  Flexible arm to fix cell phones of 58–85mm width  Adjustable rotation of 360° degrees  Adjust to any size of personal phone or player How to fix a cell phone into the cradle  Push the cell phone to the right side.
PAGE 5
How to remove a cell phone from the cradle  The cell phone is fixed cradle. in the  The thumb is holding on the left arm of the cradle, and with the other fingers you can grab out of the cell phone from the cradle directly. Warnings  Do not attempt to disassemble the charger, it may result in short-circuit or even damage.  Do not drop, shake or dismantle the charger, it may break internal circuit boards or mechanics.