User manual

Product overview with its USB ports
How to assemble the cradle
(1) Place the screw cap (threads facing up)
over the ball joint of the Air Vent Mount
(2) Snap the cradle on to the ball joint of
the Air Vent Mount. You will hear a “click”
tone when it is properly connected.
(3) Tighten the screw cap to the cradle by
turning it clockwise.
NOTE: You may have to loosen the screw
cap to adjust the cradle to your desired
angle later.
(4) Removing the cradle: Unscrew the screw cap by turning it counter-clockwise, and then
pull the cradle off the Air Vent Mount.