Warranty

Master-Slave set
Two or more than two identical lamps connected with 3-pin DMX signal cable, set any one as host as demo or
gradual or other play mode, other lamps receiving address set as DMX mode(DIP 1 on), the master-slave
feature allows you control multiple units without having to go each unit and alter the settings, allowing you to
quickly adjust the color output throughout the entire venue in seconds.
Note: When using the master / slave setup only ONE unit can act as the master. ALL other fixtures must have
the DIP switch set to DIP 1 ON.
When using the master / slave setup the fixtures can’t be connected to a DMX controller as it would interfere
with the master / slave settings.
LG700x