Operation Manual

Handleiding Internet van Ziggo 27
If the password is not accepted, an error message is displayed:
Please reflash the web and wait for Password dialog pop-up, then typing the
correct username and password again.
4.2.4 Diagnostics
This page offers basic diagnostic tools for you to use when connectivity
problems occur. When you ping an Internet device, you send a packet to its
TCP/IP stack, and it sends one back to yours. To use the ping Test, enter the
information needed and press Start Test; the Result will be displayed in the
lower part of the window. Press Abort Test to stop, and Clear Results to clear
the result contents.
Let op!
Firewalls may cause pings to fail but still provide you TCP/IP access to selected
devices behind them. Keep this in mind when ping a device that may be behind
a firewall. Ping is most useful to verify connectivity with PCs which do not have
firewalls, such as the PCs on your LAN side.
figure 15: Gateway\Status\Diagnostics