Operation Manual

Handleiding Internet van Ziggo 45
Press Create IPv4 button you will see follow options shows on the page. To
specify rules, choose Service Name or Port number range to set up. IP Address
0.0.0.0 means allow all IP address.
figure 33: Gateway\Advanced\Forwarding setting
This page allows you to specify up to rules. For example, to specify that
outsiders should have access to an FTP server you have running at 192.168.0.5,
create a rule with that address and Start Port =20 and End Port =21 (FTP port
ranges) and Protocol = TCP (FTP runs over TCP and the other transport
protocol, UDP), and click Apply. This will cause inbound packets that match to
be forwarded to that PC rather than blocked. As these connections are not
tracked, no entry is made for them in the Connection Table. The same IP
address can be entered multiple times with different ports.
Press Create IPv6 button you will see follow options shows on the page. To
specify rules, choose Service Name or Port number range to set up. IP Address
0.0.0.0 means allow all IP address.
figure 34: Gateway\Advanced\Forwarding setting