Operation Manual

Handleiding Internet van Ziggo 56
4.7.1 Radio
To set the basic configuration for the wireless features, click RADIO from the
Wireless menu. These must match the settings you make on your wireless-
equipped PC on the LAN side.
figure 44: Gateway/Wireless/Radio
Interface The wireless radio in your gateway can be
completely de-activated by changing Interface to
Disabled. Click the Apply button to save your
settings. Activated by changing interface to
enabled
Wireless MAC address The MAC address for this wireless device will be
displayed in this field automatically.
Output power This setting decides the output power of this
device. You may use it to economize on electricity
by selecting lower percentage of power output.
Control the range of the AP by adjusting the radio
output power.
802.11 Band It Support 2.4 GHz and 5 GHz band. This default
band was 2.4 GHz.