Operation Manual

Handleiding Internet van Ziggo 64
figure 48: WEP (64-bit) / WEP (128-bit)
Automatic Security Configuration
Wi-Fi Protected Setup
TM
(WPS) is an easy and secure way of configuring and
connecting your Wireless access point. In this case, the Wireless Voice Gateway
is the Access Point (AP), and Your PC (or Wireless Device) is called the STA.
When configuring your Wireless Network via WPS, Messages are exchanged
between the STA and AP in order to configure the Security Settings on both
devices.
WPS Configuration It will help you to Enable or Disable the WPS
feature. To enable you need to select WPS, to
disable you need to select Disabled.
Note: After you Enable the WPS you will get the
options as show in Fig.2-36 and the WPS
Configuration State box will show its configuration
status.
Device Name By using this you can change the factory default to
a name of your choice which is up to 32 characters
long as like SSID.
WPS Setup AP Here you do not need to change anything, just skip
this step.
WPS Add Client There are two methods type”Client PIN” and
“Authorized Client MAC”. Type in the client
information you want. Then press button “add”.