Operation Manual

Handleiding Internet van Ziggo 66
And WPS Configure Status will be “In progress”, after establishing the
connection the WPS Configure Status will be “Success!” as shown below. After
succesful connection the client will get IP adress from AP and then internet will
be accessible.
figure 52: WPS Setup AP successful/PUSH
WPS Add Client process also can finish with type in Authorized Client MAC.
4.7.3 Access Control
This page allows you to control device that can connect to the AP and list all
connected clients. Control is made by Mac Address.
figure 53: Gateway\Wireless\Access Control
Administration Web Page
Access
This field let you decide if a PC connected over Wi-
Fi to the Gateway can have access to the Gateway
Web Pages.