Operation Manual

Handleiding Internet van Ziggo 70
4.7.5 Bridging
The Bridging page provides a location where settings can be adjusted related to
the WDS (Wireless Distribution System) feature.
WDS is a system that enables the interconnection of access points wirelessly. It
may also be referred to as repeater mode because it appears to bridge and
accept wireless clients at the same time (unlike traditional bridging).
The wireless gateway can be placed in a mode that allows the gateway to
communicate with other “extender” wireless access points either exclusively or
mixed with communications to local PCs. Use this page to designate the
Remote Bridges the gateway is allowed to communicate with, and to select the
Wireless Bridging mode.
figure 55: Gateway\Wireless\Bridging
Wireless Bridging Choose “Disabled” to shutdown this function;
select Enabled to turn on the function of WDS.
Remote Bridges Enter the MAC addresses of the remote Bridges to
realy the signals for each other.
Apply After proper configuration, click Apply to invoke
the settings.