Operation Manual

Stromversorgung
Netzteil Schaltnetzteil (180V - 250V/47 ... 63Hz)
Leistungsaufnahme des Digitalreceivers:
0,24 W* in Standby-Mode (Standby-Uhr aus)
0,91 W* in Standby-Mode (Standby-Uhr ein)
7,8 W* in Standby-Mode (Schnellstart aktiviert, Standby-Uhr aus)
8,3 W* in Standby-Mode (Schnellstart aktiviert, Standby-Uhr an)
12 W Betrieb (ohne LNB-Versorgung)
21,5 W in Betrieb (bei 1x400 mA LNB-Strom)
zusätzliche Leistungsaufnahme durch optionale DVB-Tuner:
+0,03 W* in Standby-Mode (mit opt. DVB-S Erweiterungstuner)
+0 W* in Standby-Mode (mit opt. DVB-C/T Erweiterungstuner)
+0,8 W* in Standby-Mode (Schnellstart aktiviert,opt. DVB-S Tuner)
+1 W* in Standby-Mode (Schnellstart aktiviert,opt. DVB-C/T Tuner)
+1,4 W in Betrieb (mit opt. DVB-S Erweiterungstuner)
+2,3 W in Betrieb (mit opt. DVB-C/T Erweiterungstuner)
zusätzliche Leistungsaufnahme durch optionale interne Festplatte:
+0,3 W*/** in Standby-Mode (Schnellstart aktiviert)
+0,3 W** in Betrieb (Festplatte in Standby)
+0,9 W** in Betrieb (Festplatte in Idle)
+1,8 W** in Betrieb (Festplatte in Timeshift)
*) gilt nicht für die Dauer der SFI-Aktualisierung/Software-Aktualisierung
**) abhängig von verwendeter Festplatte/SSD
Allgemeines
Abmessungen (BxTxH): 400 mm x 215,5 mm x 64,5 mm
Gewicht: ca. 1790g
227