Instruction Manual

2-5
2.6 USING OPERATOR DIRECT COMMANDS (Level 1) - continued
Upon selecting this command the cursor will appear at the MODE position, the forward arrow (6) key allows the
user to scroll through the available modes one at a time. see the table below.
Table 2.2 Operating Modes
Channel Operating Mode Indicator
Analog Wide (25 kHz) ‘w’
Analog Narrow (12.5 kHz) ‘n’
Digital (12.5 kHz) ‘D’
‘ENTER’ – accepts this entry and returns.
‘ESC’ - abandons the entry and returns.
4 (BACK ARROW) - Scroll Down the Channel List
This command will scroll DOWN through the programmed channels until reaching the lowest channel
programmed, it will then wrap around and restart from the top.
5 (SCAN) - Edit Channel Scan List
This command will select the SCAN LIST - if any - that the selected channel is included in. The channel may
be included in any one of the five (5) scan lists that are supported.
numbers 0-5 – select the Scan List (0 for none)
‘ENTER’ – accepts this entry and returns.
‘ESC’ - abandons the entry and returns.
6 (FORWARD ARROW) - Scroll Up the Channel List
Use the forward arrow This command will scroll UP through the programmed channels until reaching the
highest channel programmed, it will then wrap around and restart from the bottom.
7 (FREQ) - Edit Channel Operating Frequency
This command will edit the Operating Frequency of the selected channel; both MAIN and GUARD
channels may be edited and the channel to be edited is determined by the position of the MN/GD switch and
the G1/G2 switch.
8 (DOWN ARROW) - Decreased Display Brightness
Press and hold the down arrow (8) key to decrease the brightness of the LED display, it stops at minimum.
9 (SQL) - Edit Channel Squelch Mode
This command will edit the Squelch Parameters of the selected channel; both MAIN and GUARD channels
may be edited and the channel to be edited is determined by the position of the MN/GD switch and the G1/G2
switch.
For the receiver select a Squelch mode
6 (forward arrow) – scroll through available Squelch Modes.
‘ENTER’ – accepts this entry.
‘ESC’ - abandons the entry.