Instruction Manual

2-6
2.6 USING OPERATOR DIRECT COMMANDS (Level 1) - continued
NOTE: Squelch modes available will depend on operating mode chosen. ie. analog modes will not offer P25
talkgroup as an option.
Table 2.3 Receive and Transmit Squelch Modes
Squelch Mode Receive Transmit
carrier Rx Tx
noise Rn - (Tx)
CTCSS Tones Rt Tt
DCS Codes Rc Tc
P25 Talkgroup Rg Tg
Enter a key number pertaining to the Squelch mode chosen, refer to the tables below.
‘ENTER’ – accepts this entry.
‘ESC’ - abandons the entry.
Once the Rx Squelch Mode has been chosen, the process is repeated for the Tx Squelch modes.
Table 2.4 Noise Level
Level Key Number
0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
10 10
11 11
12 12
13 13
14 14
15 15
16 16