Instruction Manual

2-11
9 – not currently used - reserved
0 (PROG) - Menu Level Up
Pressing this key selects the next Higher Menu Level, the Menu Level is indicated in the 4 character position
th
on the lower row of the display. The Menu Level is indicated in subscript and is as follows:
Table 2.8 Keypad Menu Level
Level Display
1 direct blank
2 programming 2
3 maintenance 3
Upon pressing this key, the radio will remain in the new Command Level for 5 seconds, if there is no further
user input within this time frame then the radio will revert to the Direct Command Level. The Direct Command
Level (level 1) is the normal operating mode for the radio.
‘ENTER’ – n/a
‘ESC’ – back one Menu Level – (to operator direct menu level)