User manual

ManualsBrandsTECHNO LINE ManualsClocks & WatchesRadio Wall clock 290 mm x 25 mm x 190 mm Grey

Foldable

stand

Hanging Holes

Foldable stand

Battery cover

Radio controlled reception icon

Indoor Temperature display

in ºC/ºF or seconds display

Date

Moon phase icon

Weekday

DCF time

Alarm icon

Battery compartment

Battery

cover

              

MOON PHASE CLOCK

Instruction Manual

INTRODUCTION

Congratulations on purchasing this state-of-the-art Moon Phase Clock as an example of superior

design and engineering. Providing radio-controlled time, date, indoor temperature display, and Moon

phases, this innovative clock is ideal for home or office use. Operation of this product is simple and

straightforward. By reading this operating manual, the user will receive a better understanding of the

functions and the optimum benefit of all its features.

Moon Phase Clock:

FEATURES

DCF-77 Radio controlled time with manual setting option

12/24 hour display

Time display: hour, minute and seconds

Calendar display

Weekday display with seven languages option: German, English, French, Spanish, Italian, Dutch

and Danish.

Time zone options ±12 hours

Alarm setting with snooze function

Indoor temperature display in degree Celsius or Fahrenheit

Display of 8 Moon phases throughout the year

Wall mountable or free standing

SETTING UP

1. Slide the battery cover open on the Moon Phase Clock as indicated.

2. Checking the correct polarization, insert 2 x AA IEC LR6, 1.5V batteries into the battery

compartment and replace the battery cover.

3. Once the batteries are in place while beep sounds shortly, all segments of the LCD will light up

briefly. Then the indoor temperature, the time as 0:00, the date as 1/1, weekday as MON and the

Moon phase will be displayed.

4. The DCF-77 time code reception will automatically start. This takes typically between 3 - 5

minutes in good conditions. If after 10 minutes the DCF time has not been received, the clock

will automatically attempt to receive the DCF time at the next full hour. When this is successful,

the received time will be displayed. The date and Moon phase will also be updated with the

received time (Please refer also to notes on “Radio controlled time”)

BATTERIES CHANGE

For best performance, batteries should be replaced at least once and a year to maintain the best

running accuracy. Ensure that the batteries used are new of the correct size.

Note:

Always wait for 30 seconds after removing the batteries before reinserting, otherwise start up and

transmission problems may occur.

Please help in the preservation of the environment and return used batteries to an

authorized depot.

FUNCTION KEYS

The Moon Phase Clock has four easy to use keys:

Function keys

SET key: To enter the manual setting modes if press for about 1 second

To stop the alarm

+ key: To change the values in all setting modes

To alternate between indoor temperature and seconds display

To stop the alarm

LCD 2 display

ALM key: To enter the alarm setting mode if press for about 1 seconds

To set the alarm ON/OFF

To stop the alarm

SNOOZE key: To activate the snooze function during alarm

To switch OFF the alarm for the next 24 hours if pressed for about 1 second during

alarm function or snooze

To stop the alarm

To exit any setting modes

LCD SCREEN

The Moon Phase Clock's LCD is divided into 2 sections and once the batteries are inserted, all the

segments will light up briefly before displaying:

LCD 1 display

LCD1- DCF RADIO CONTROLLED TIME, ALARM AND SNOOZE

Once the batteries are inserted into the battery compartment, the Moon Phase Clock will receive the

DCF time within 3-5 minutes. Once received, all segments of the clock will display the informations

accordingly, then no further reception will take place for the DCF signal that day.

The DCF reception takes places at 2:00 and 3:00 am each day. If the clock is unable to receive the

reception, it will attempt to receive the DCF time at the next full hour or as long as it receives the DCF

time successfully.

Summary of content (3 pages)

PAGE 1
4. MOON PHASE CLOCK Instruction Manual INTRODUCTION Congratulations on purchasing this state-of-the-art Moon Phase Clock as an example of superior design and engineering. Providing radio-controlled time, date, indoor temperature display, and Moon phases, this innovative clock is ideal for home or office use. Operation of this product is simple and straightforward. By reading this operating manual, the user will receive a better understanding of the functions and the optimum benefit of all its features.
PAGE 2
The time base for the radio controlled time is a Cesium Atomic Clock operated by the Physikalisch Technische Bundesanstalt Braunschweig which has a time deviation of less than one second in one million years. The time is coded and transmitted from Mainflingen near Frankfurt via frequency signal DCF-77 (77.5 kHz) and has a transmitting range of approximately 1,500 km. Your radio-controlled Moon Phase Clock receives this signal and converts it to show the precise time in summer or wintertime.
PAGE 3
1. 2. 3. 4. 5. Press the ALM key for about 1 second or until the digits start flashing in the LCD to enter into the Alarm setting mode. The hour digits start flashing. Press the + key to set the hour. Press the ALM key to enter the minute mode. The minute digits start flashing. Press the + key to set the minutes. Press the ALM key or the SNOOZE key to exit the Alarm setting mode or wait for 15 seconds automatic timout. Note: If the ALM key is pressed for a short time, the alarm toggles between ON/OFF.