Extra Information
22
Bike, Recline, Synchro - Advanced LED display
Programming personal proles
the key in standby.
tof1
Press number keys 3 6 9 simultaneously to access personal proles management.
of1
Type in the number of the prole to be saved with the number keys, then press ENTER to conrm. If the number entered corresponds to a previously stored
prole, this prole will shown in the goal dial display; if you proceed at this point, the previously stored prole will be overwritten.
1foowfo1
Press number key 1 to program a constant power prole, or number key 2 to program a constant heart rate prole.
too
Press the key for the selected GOAL.
Now there is the programming of the individual steps: for each step you have to enter dierent parameters, depending on the type of prole selected.
• For the constant power prole, you must set the selected GOAL value and power:
t1t
t1t
Type in the goal value with the number keys and then press ENTER to conrm and proceed.