Operation Manual

BIKE FORMA
14
Electrical connection
Before connecting the equipment to the mains power supply, ensure that the electrical installation complies to binding regulations. Check the mains power
supply specications on the equipment identity label.
The product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of
electric shock. The product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate
outlet that is properly installed and grounded in accordance with all local codes and ordinances.
W
The power supply socket must be grounded . If not, a ground connection must be installed by a qualied electrician before connecting
the equipment to the electricity mains.
Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualied electrician or
serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product; if it will
not t in the outlet, have a proper outlet installed by a qualied electrician.
W
The wall socket must be located in a place where the plugging and
unplugging can be done easily and safely.
When plugging in, the main switch on the equipment must be in the
0 position (i.e. the equipment must be switched o).
Check the state of the power supply cable periodically.
The power cable is supplied with the product.
Plug the power cable rst into the equipment socket and then into the wall socket.