Operation Manual

MYRUN TECHNOGYM
B
A
13
Safety devices and warnings
Pull-operated magnetic stop device (A). Located under the start/stop key, it
immediately stops the equipment in an emergency situation. A cord connects
the stop device to a clip (B) to be attached to your clothing; in this way, if
you are too far from the screen, dropping back towards the edge of the belt,
the stop device will be pulled away, thus causing the treadmill belt to stop,
without any need to use the controls.
The stop device must be repositioned to restore operation to the equipment.
To put the clip back in its holder, wind the cord in the direction shown in the
illustration.
Before using the equipment, check that the stop device works correctly
and attach the cord to your clothing with the clip provided.
Product immobilisation
To prevent uncontrolled use of the product, remove the magnetic stop
device (A) and store it in a safe place.