Operation Manual
MYRUN TECHNOGYM
19
Electrical connection
Before connecting the unit to the mains power supply, ensure that the electrical installation complies with current regulations. Check the mains power supply
specications on the unit's identication plate.
W
The wall socket must be located in a place where the unit may be easily and safely plugged in and unplugged.
When plugging in, the main switch on the unit must be in the 0 position (i.e. the unit must be switched o).
Check the state of the power cable periodically.
Plug the power cable into the unit's socket rst and then into the wall socket.
The unit must be earthed. If the unit malfunctions or breaks down, earthing
provides a minimum resistance path for electric current thus reducing the risk
of electric shock. The unit is equipped with a cable that includes an earth wire
and an earthing plug. The plug must be connected to an appropriate socket
that is properly installed and earthed in accordance with all local codes and
ordinances.
W
The power supply socket must be earthed . If not, an earth connection must be installed by a qualied electrician before connecting
the unit to the electricity mains.
Improper connection of the earth wire may result in a risk of electrical shock. Check with a qualied electrician or serviceman if you
are in doubt as to whether the product is properly earthed. Do not modify the plug provided with the unit; if it does not t the socket,
have a suitable socket installed by a qualied electrician.