Specification

SUBMITTAL SHEET
PUSH TO CONNECT
Brass Fittings
PUSH TO CONNECT
Tectite by Apollo Push-To-Connect ttings are the fastest, cleanest and simplest
way to join any combination of copper, CPVC, PE-RT and PEX pipe without the use of
tools, solder, open ame or glue.
Simply insert the pipe to allow the high-strength stainless steel teeth to grip the
pipe securely against the specially designed O-ring. Fitting removal and reuse is just
as simple using a simple demount clip (sold separately). After assembly, ttings may
be rotated for simpler installation in tight spaces.
All Tectite by Apollo ttings are approved for use in both potable water and hydronic
heating piping systems.
Features:
• Constructed of lead free dezincification resistant (DZR) brass for superior reliability
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any combination of
copper, PEX, CPVC or PE-RT pipe
• Corrosion resistant for greater longevity
• Lifetime warranty on most fittings. Refer to Apollo Warranty on www.apolloflow.com
for item specific information.
Specications:
• Maximum Working Pressure: 200 psi
• Temperature Range: 32º-250º F
• Approved for behind-the-wall with no access and burial
• Ideal for potable water and hydronic heating applications
Approvals:
• NSF 61
• ASSE1061
• IAPMO
• Meets UPC, IPC, and cUPC standard requirements
Installation:
Squarely cut the pipe to desired length. Mark the insertion depth using the depth gauge (sold
separately). Push pipe and twist into the fitting until the fitting edge meets the depth line. Fitting
removal and reuse is just as simple using a demount clip (sold separately). After assembly, fittings
may be rotated for simpler installation in tight spaces.
Job Name:
Job Location:
Engineer:
Contractor:
Tag:
PO Number:
Representative: