Operation Manual
6
7
Using
for the first time
■ Fill with water to 2/3 of the pan height.
■ Close the X’press Cooker.
■ Place the pressure regulator valve on 2.
■ Put the X’press Cooker on the hob and set to maximum heat.
■ When steam begins to escape from the valve, turn the heat down
and wait for 15 minutes.
■ After 15 minutes turn off the heat.
■ Place the valve on .
■ When no more steam comes out of the pressure regulator valve and
the pressure indicator is in its low position, open the X’press Cooker.
■ Rinse the X’press Cooker with cold water and dry.
■ N.B.: The appearance of stains on the inside bottom of the pan does
not affect the quality of the metal. These are marks left by hard water.
Use a little diluted vinegar and a scouring pad to make them
disappear.