Instructions / Assembly

TEHOME
MOUNTING INSTRUCTIONS
Mirror
X1
Bracket
X2
Plate
X2
Setscrew
X2
Screw
X4
Anchor
X4
Wrench
X1
Contents:
Ball Finial
X2
Attach Brackets to Mirror with Ball Finials, with
the small holes in the Brackets facing down.
Hole
Drill four 1/8” pilot holes in wall for eachPlate.
Screw the plastic Anchors into the holes until flush.
Secure the Plates onto the anchors with the Screws.
Hook the Brackets (holes down) over the Plates.
Be sure the Brackets catch the upper lip on the
Plates. Secure with the Setscrews from below.
.
The hardware included with this item is meant for dry wall mounting only. If other wall types, please consult your local
hardware store for assistance
Questions, problems, missing parts?
The hardware included with this item is meant for dry wall mounting only. If other wall types, please consult your local
hardware store for assistance
Missing Hardware: The parts are been carefully packed within a red bag and inserted in the styrofoam.
Please check again in case you do not find the parts. If your order indeed arrives missing hardware,
please do not worry, and feel free to reach out to us for help, we will ship you the replacement ASAP.
[e-mail]
1
MOUNTING TEMPLATE
2
Paste the position map horizontally on the
position to be installed and mark it with a pencil.
TEHOME
position map
X1
3 4
Cleaning
Avoid using commercial or abrasive cleaners. Using only a soft damp cloth will preserve the finish.