Operation Manual

Operation

STOP function

The cooking process can be briefly interrupted with the STOP function, e.g. if

the doorbell rings. The STOP function must be released in order to continue

cooking at the same power level. If a timer has been set it will pause and will

then continue.

This function is only available for 10 minutes for reasons of safety. The hob

will then be switched off.

1. Pots and pans are on the cooking zones and the required power levels

have been set.

2. Press the

STOP key

. The letters S-T-O-P will be shown one after

another instead of the cooking levels previously selected.

3. The interruption is ended by firstly pressing the

STOP key

and then

pressing

any other key

(except the ON/OFF key).

The second key must be pressed within 10 seconds, otherwise the hob

will switch off.

Keeping warm function

With the function for keeping food warm you can use one of the cooking

zones to keep food warm. The respective cooking zone is operated at a low

power level.

1. Cookware is placed on a cooking zone and a power level (e.g. 3) is

selected.

The stand-by dot of the cooking zone selected must light up. It may be

necessary to press a

cooking zone selection key

(e.g. for front left).

2. Keep the

Minus key pressed

to switch the power settings down

(... 3, 2, 1, ). The setting will stop at and the warming function will

have been activated.

3. Press the

Minus key

once to de-activate the function (0).

The function for keeping food warm is available for 120 minutes, after which

the hob will be switched off.

keep pressed