User's Manual

Reference
12
CPS250 User Manual
5. Turn POWER to ON, and readjust voltages if necessary.
Zero to –40 V and fixed +5 V outputs are shown in Figure 7. Follow
the procedures outlined above to operate this configuration.
Load 1
+5 V
Load 2
Zero to –40 V
Figure 7: Connections to Provide Fixed +5 V and 0 to –40 V
Figure 8 shows the configuration for three, ground referenced,
negative supplies.
Load 1
–5 V
Load 2
Zero to –20 V
Load 3
Zero to –20 V
Figure 8: Independent Ground-Referenced Applications (negative output)